Courtesy Lamp: Service and Repair

INTERIOR ROOM LAMP

Removal and Installation


FRONT ROOM/MAP LAMP ASSEMBLY

Removal





1.Release the metal clips and drop front edge of front room/map lamp assembly (1) away from headlining. Slide front room/map lamp assembly forward in vehicle to clear pawls at rear.
: Vehicle front
:Pawl
:Metal clip
2.Disconnect the connectors, then remove the front room/map lamp assembly.
Installation
Installation is in the reverse order of removal.
Bulb or Lens Replacement





1.Using a suitable tool (3), remove the front room/map lamp lens (2).
2.Pull bulb (1) straight out to remove.

VANITY MIRROR LAMP

Removal
The vanity mirror lamp is replaced as part of the sun visor assembly. Removal And Installation.
Installation
Installation is in the reverse order of removal.
Bulb or Lens Replacement





1.Using a suitable tool (1), remove the vanity mirror lamp lens (2).
2.Pull bulb (3) straight out to remove.

GLOVE BOX LAMP

Removal





1.Remove the glove box assembly (1). Service and Repair.
2.Rotate glove box lamp socket (3) and bulb (2) counterclockwise and then pull out to remove.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1.Remove the glove box lamp. Refer to GLOVE BOX LAMP.
2.Pull bulb straight out to remove.

STEP LAMP

Removal










1.Insert a suitable tool between door finisher and step lamp lens/socket to release the pawls.
2.Disconnect the step lamp connector, then remove step lamp.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1.Remove the step lamp lens/socket.
2.Pull the bulb straight out to remove.

FOOT LAMP

Removal - LH
1.Using a suitable tool, release the foot lamp pawls and remove the foot lamp from the instrument lower panel LH side.
2.Disconnect the harness connector and remove the foot lamp.
Installation - LH
Installation is in the reverse order of removal.
Removal - RH
1.Rotate foot lamp socket counterclockwise to release from the substrate.
2.Disconnect the harness connector and remove the foot lamp.
Installation - RH
Installation is in the reverse order of removal.
Bulb Replacement
1.Remove the foot lamp. Refer to FOOT LAMP.
2.Pull bulb straight out to remove.

PERSONAL LAMP

Removal
The personal lamp is replaced as part of the headlining assembly. Removal And Installation.
Installation
Installation is in the reverse order of removal.
Bulb or Lens Replacement





1.Using a suitable tool, release the pawls and remove personal lamp lens (3) from the personal lamp (1).
: Vehicle front
2.Pull bulb (2) straight out to remove.