Windshield Washer Switch: Service and Repair

FRONT WIPER AND WASHER SWITCH

Removal and Installation

NOTE:
The front wiper and washer switch is part of the combination switch assembly.

REMOVAL

1.Disconnect battery.

CAUTION:
- Before servicing, disconnect both battery terminals and wait at least three minutes.
- Do not use air tools or electric tools for servicing.
- After the work is completed, make sure no system malfunction is detected by air bag warning lamp.
- In case a malfunction is detected by the air bag warning lamp, reset with the self-diagnosis function and delete the memory with CONSULT.
- If a malfunction is still detected after the above operation, perform self-diagnosis to repair malfunctions. Component Tests and General Diagnostics.
2.Remove steering column covers. Instrument Lower Panel LH.
3.Rotate steering wheel clockwise to access first combination switch bolt and remove the bolt.
4.Rotate steering wheel counter-clockwise to access second combination switch bolt and remove the bolt.
Disconnect electrical connectors and remove the combination switch.

INSTALLATION

Installation is in the reverse order of removal.