Wiper Motor Linkage: Service and Repair

FRONT WIPER

FRONT WIPER DRIVE ASSEMBLY : Removal and Installation


REMOVAL

1.Turn wiper switch ON to operate wiper motor and then turn wiper switch OFF (auto stop).
2.Remove wiper arms. Removal and Installation.
3.Remove hood ledge covers.
4.Remove the cowl top grille. Exploded View.
5.Disconnect washer hose from the lower cowl top extension brace.
6.Remove the lower cowl top extension brace. Removal And Installation.
7.Detach the wiper drive harness clip from the wiper drive assembly frame.





8.Remove the front wiper drive assembly bolts (A), disconnect the wiper drive motor connector (B) and remove the front wiper drive assembly (1).

INSTALLATION

Installation is in the reverse order of removal.
- Adjust wiper arm stop location as necessary. Removal and Installation.