Rear Compartment Lid Latch Replacement (With Inside Release Handle)

Rear Compartment Lid Latch Replacement (With Inside Release Handle)

Removal Procedure

1. Remove the rear compartment lid trim.




2. Disconnect the electrical connectors from the lid latch assembly.
3. Remove the latch cable from the back of the lock cylinder (1).
4. Remove the fastener (2) securing the T-handle to the rear compartment lid.
5. Remove the fasteners (3) securing the lid latch assembly to the rear compartment lid.
6. Remove the rear compartment lid interior release handle and latch assembly from the vehicle.

Installation Procedure




1. Position the rear compartment lid interior release handle and latch assembly to the rear compartment lid.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the fasteners in order to secure the lid latch assembly to the rear compartment lid.

Tighten the fasteners 10.5 Nm (93 lb in).

3. Install the fastener (2) in order to secure the T-handle to the rear compartment lid.
4. Install the latch cable to the back of the lock cylinder (1).
5. Connect the electrical connectors to the lid latch assembly.
6. Adjust the rear compartment lid latch if necessary. Refer to Rear Compartment Lid Adjustment (Adjustments).
7. Install the rear compartment lid trim.