Steering Wheel: Service and Repair

Steering Wheel






Tool Required:
- J 1859-09 Steering Wheel Puller
OR
- BT-61-9 Steering Wheel Puller

Remove or Disconnect

1. Negative battery cable.
2. Pad and horn lead.
3. Retainer and nut.
4. Steering wheel using J 1859-03 or BT-61-9.

Install or Connect

1. Align mark on steering wheel with mark on shaft, then install steering wheel.
2. Nut. Tighten steering wheel nut to 41 Nm (30 ft. lbs.).
3. Retainer.
4. Horn lead and pad.