Glove Compartment: Service and Repair

REMOVAL PROCEDURE
1. Open the instrument panel (IP) compartment door.
2. Remove IP compartment insert fasteners (1).
3. Remove the insert (2) by pulling rearward.

INSTALLATION PROCEDURE
1. Install the IP compartment insert (2) to the IP.

NOTICE: Refer to Fastener Notice in Cautions and Notices.

2. Install the IP compartment insert fasteners (1).

Tighten
Tighten the fasteners to 1.9 N.m (17 lb in).

3. Close the IP compartment door.