Ash Tray: Service and Repair
Ashtray Replacement
Removal Procedure
1. Remove the console trim plate. Refer to Trim Plate Replacement - Console (Service and Repair) .
2. Remove the instrument panel center trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center (Instrument Panel Cluster (IPC) - Trim Panel Replacement) .
3. Remove the 3 screws (3) attaching the ashtray (1) to the instrument panel.
4. Slide the ashtray out to remove.
5. Disconnect the wiring connector (2), if equipped.
Installation Procedure
1. Connect the wiring connector (2), if equipped
2. Install the ashtray (1) to the instrument panel.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the 3 screws (3) securing the ashtray (1) to the instrument panel.
Tighten the 3 screws to 2 N.m (18 lb in).
4. Install the instrument panel center trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center (Instrument Panel Cluster (IPC) - Trim Panel Replacement) .
5. Install the console trim plate. Refer to Trim Plate Replacement - Console (Service and Repair) .