Range Selector Lever Cable Bracket Replacement

Range Selector Lever Cable Bracket Replacement

Removal Procedure

1. Set the park brake and chock the wheels.




2. Disconnect the transaxle range selector lever cable terminal (1) from the transaxle manual shift lever pin (5).
3. Remove the retainer (2) from the transaxle range selector lever cable.
4. Press the locking tabs inward in order to release the transaxle range selector lever cable (3) from the cable bracket (4).




5. Remove the shift control cable bracket bolts.
6. Remove the shift control cable bracket.



Installation Procedure





1. Install the transaxle shift control bracket.

Notice: Refer to Fastener Notice .

2. Install the transaxle shift control bracket bolts.

Tighten the bolts to 25 N.m (18 lb ft).





3. Install the transaxle range selector lever cable (3) to the cable bracket (4).
4. Install the retainer (2) to the transaxle range selector lever cable.
5. Connect the transaxle range selector lever cable terminal (1) to the transaxle manual shift lever pin (5).
6. Adjust the automatic transmission range selector lever cable. Refer to Range Selector Lever Cable Adjustment (Adjustments) .