Power Mirror Switch: Service and Repair

Power Mirror Switch Replacement

Removal Procedure






Important: The console trim plate (1) is retained by clips.


1. Grasp the console trim plate (1) at point (A) and pull upwards to disengage the retaining clips from the floor console (2).




2. Disconnect the window and exterior mirror switch electrical connector (3).
3. Disconnect the ESP and heated seat switches assembly electrical connector (2).
4. Remove the console trim plate (1).





Important: Remove the power window/mirror switch (2) by releasing from the retaining clips (3) on the console trim plate (1).


5. Remove the power window/mirror switch (2) from the console trim plate (1).



Installation Procedure






Important: Install the power window/mirror switch (2) by attaching to the retaining clips (3) on the console trim plate (1).


1. Install the power window/mirror switch (2) to the console trim plate (1).




2. Position the console trim plate (1) over the floor console.
3. Connect the window and exterior mirror switch electrical connector (3).
4. Connect the ESP and heated seat switches assembly electrical connector (2).





Important: The console trim plate (1) is retained by clips.


5. Install the console trim plate (1) and push downwards at (A) to engage the retaining clips to the floor console (2).