Steering Mounted Controls Assembly: Service and Repair

Steering Wheel Control Switch Assembly Replacement

Removal Procedure





1. Disable the occupant protection system. Refer to SIR Disabling and Enabling (Service and Repair) .
2. Remove the steering wheel inflatable restraint. Refer to Steering Wheel Inflatable Restraint Module Replacement (Service and Repair) .
3. Remove the steering wheel. Refer to Steering Wheel Replacement (Steering Wheel Replacement) .
4. Remove the steering wheel hub to rear cover screws (1).





Important: Disengage the retaining lugs (2).


5. Remove the rear cover (1) from the steering wheel hub (3).




6. Remove the steering wheel hub to steering wheel audio control switch assembly screws (1).
7. Remove the steering wheel audio control switch assembly harness grounding screw (2).




8. Remove the steering wheel hub to steering wheel spoke trim retaining screws (1).
9. Remove the steering wheel audio control switches from the steering wheel hub assembly.



Installation Procedure





1. Install the steering wheel audio control switches from the steering wheel hub assembly.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the steering wheel audio control switch assembly harness grounding screw (2).

Tighten the screws to 1 N.m (9 lb in).

3. Install the steering wheel hub to steering wheel audio control switch assembly retaining screws (1).

Tighten the screws to 1 N.m (9 lb in).






Important: Make sure that all the retainers (2) engage.


4. Install the rear cover (1) to the steering wheel hub (3).




5. Install the steering wheel hub to rear cover retaining screws (1).

Tighten the screws to 1 N.m (9 lb in).

6. Install the steering wheel. Refer to Steering Wheel Replacement (Steering Wheel Replacement) .
7. Install the steering wheel inflatable restraint. Refer to Steering Wheel Inflatable Restraint Module Replacement (Service and Repair) .
8. Enable the occupant protection system. Refer to SIR Disabling and Enabling (Service and Repair) .