Amplifier: Service and Repair

Radio Speaker Amplifier Replacement

Removal Procedure

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
2. Remove the front passenger seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).




3. Disconnect the electrical connector (2).
4. Remove the 3 bolts (1, 3, 4).
5. Remove the amplifier from the vehicle.



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice).

1. Secure the amplifier to the vehicle with the 3 bolts (1, 3, 4).

Tighten the 3 bolts to 10 N.m (89 lb in).

2. Connect the electrical connector (2).
3. Install the front passenger seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).