Air Cleaner Fresh Air Duct/Hose: Service and Repair

Air Cleaner Inlet Duct Replacement

Removal Procedure




1. Remove the positive crankcase ventilation (PCV) hose (2) from the air cleaner duct resonator (4).
2. Remove the air cleaner duct to throttle body retaining clamp (1).
3. Remove the air cleaner duct to intake air temperature (IAT)/mass air flow (MAF) sensor retaining clamp (3).
4. Remove the air cleaner duct (4).

Installation Procedure




1. Install the air cleaner intake duct (4) to the engine.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the air cleaner duct to throttle body retaining clamp (1) and tighten to 4 Nm (35 lb in).
3. Install the air cleaner duct to IAT/MAF retaining clamp (3) and tighten to 4 Nm (35 lb in).
4. Install the PCV hose (2) to the intake duct resonator.