Removing and Installing Rear Spoiler

Removing and Installing Rear Spoiler - GT2






Removing




Components Overview

CAUTION:
Damage to paintwork when the rear spoiler is removed with the rear lid closed!
- Only remove the rear spoiler with the rear lid open.




Procedures and Instructions


Installing




Components Overview

CAUTION:
Change in handling, the balance from the front to the rear axle is affected!
- The additional wing is set to the lowest (horizontal) position for street use. Changes to the setting (to individually match the personal driving style) are only intended for the racing track. The wing tilt may be adjusted from 1° to max. 6° for use on racing tracks.
- The additional wing must be moved to the lowest position for use in public traffic.

Procedures and Instructions


Replacing rear spoiler fork




1 - Removing and installing rear spoiler fork

1. Unscrew the fastening screws -1- from the rear spoiler fork -2- and the rear spoiler -3-.

2. Replace rear spoiler fork

NOTE: During installation, the fastening screws -1- must always be secured with Loctite 240 -inset-.

3. Position the rear spoiler fork -2- on the rear spoiler -3-. Secure the rear spoiler fork -2- with the fastening screws -1-. Tightening torque: 10 Nm (7.5 ftlb.)