Test Point 1

NOTE: After a fault occurs at the alarm system and is remedied, the fault memory must be cleared.

Test point 1
Door(s) secured and terminal 15 on

Fault code 01
1. Disconnect plug connection X 11 (driver's side).
2. Check the lead from X 11 pin A3 (pin side) to the alarm control module plug I, pin 5, for continuity.
3. Check the leads from X 11 pin A3 and pin 26 (sleeve side) for continuity.

NOTE: There is another plug connection in the door on the door lock module.

4. Disconnect the plug connection X 12 (passenger's side).
5. Check the lead from X 12 pin A3 (pin side) to the alarm control module plug I, pin 28, for continuity.
6. Check the leads from X 12 pin A3 and pin 26 (sleeve side) for continuity.