Test Point 32

Test point 32
Passenger compartment monitoring sensor
Short to B+ or faulty

Fault code 32
1. Check power supply for passenger compartment monitoring sensor.
- Disconnect plug connection to the passenger compartment monitoring sensor.
- Voltmeter at plug connection, passenger compartment sensor monitoring pin 1 (positive) and pin 4 (negative).
Display: Battery voltage

2. Pull off plug I on the alarm control module.
3. Voltmeter at plug I alarm control module pin 24 and ground.
Display: 0 Volt

If battery voltage is displayed, check the wiring harness for pinches and chafing damage.

4. If no fault is detected, replace the alarm control module.