Test Point 35

TEST POINT 35
Interior monitoring Sensor Faulty

Fault Code 35

Fault Effect: No passenger compartment monitoring

Procedure

1. Pull plug I off the alarm system control module.

2. Pull off the plug at the interior monitoring sensor.

3. Voltmeter at alarm system control module plug I, pin 24 and ground Switch ignition on.

Display: 0 Volts

If battery voltage is displayed, check the wiring harness for pinches and chafing damage.

4. Ohmmeter at alarm system control module plug I, pin 8 and interior monitoring sensor pin 2

Display: < 5 ohms

It no fault is detected in the wiring, replace the interior monitoring sensor.