Test Point 5

TEST POINT 5
Belt Buckle, Driver

Fault Codes 44, 45, 46, 50

1. Disconnect the plug connection X-16.

2. Connect ohmmeter on the pin side on pins B-7 and B-8.

Display: approx. 400 ohms

Note:
The belt tongue must not be inserted in the buckle.

3. Connect ohmmeter on the pin side on pin B-7 and ground.

Display: infinity

4. Connect ohmmeter on the pin side on pins B-7 and B-8. Insert the belt tongue in the buckle.

Display: approx. 100 ohms

5. Inspect the wiring harness to the triggering unit for pinches and chafing damage.