P0606

P0606

Control Module Faulty

Diagnosis conditions
- Battery positive voltage between 10 V and 16 V
- Ignition switched on

Possible fault cause
- DME control module faulty (processor faulty)

Affected terminals
-

Diagnosis/troubleshooting

NOTE: If no fault is present, erase the fault memory.

NOTE: If connector A is disconnected from the DME control module and the ignition is or was switched on, the 'DME Control Module TIMEOUT' fault is recorded in many control modules.

NOTE: If control module connector A was disconnected from the DME in the course of troubleshooting or if the voltage supply was interrupted elsewhere (battery, fuse), the throttle adjusting unit must be adapted.