685419 Removing and installing luggage net/mesh

WM 685419 Removing and installing luggage net/mesh

Technical values





Removing luggage net/mesh

Removing luggage net





Installation position for luggage net/mesh

1. Open the rear lid.
2. Disengage luggage net -1- from the tie-down rings -2- and remove.





Removing luggage net

Removing luggage mesh





Installation position for luggage net/mesh

1. Fold front seat forwards.
2. Open the rear lid.
3. Release locking mechanism of luggage mesh right and left in -direction of arrow-.





Releasing locking mechanism

4. Disengage luggage mesh -1- right and left from the bodyshell hooks -2- -Arrow A- and then remove from mounting saddle -3- -Arrow B-.





Removing luggage mesh

Installing luggage net/mesh

Fitting fastening parts





Installation position for luggage net/mesh

Information

If the luggage mesh is retrofitted, the following spare parts must be fitted for the luggage mesh.

1. Lift lining of engine compartment lid at the front -1- with a plastic wedge -2- -Arrow A- and pull out to the front -Arrows B-.





Removing lining for engine compartment lid

2. Unscrew fastening screw -2- and remove tie-down ring -1- right and left.





Removing tie-down ring

3. Position mounting saddle -1- right and left on the body and screw down with fastening screw -2-.=> Tightening torque: 10 Nm (7.5 ftlb.)+0.5 Nm (+0.5 ftlb.)





Installing bearing pedestal

4. Insert lining for engine compartment lid -1- with the clips -arrows- in the mounting points and press downwards.





Installing lining for engine compartment lid

5. Unclip lid -1- right and left from the C-pillar trim panel -2-.





Removing lid

6. Push cover -2- right and left fully onto the bodyshell hooks -1-.





Installing cover and trim

7. Clip trim -3- right and left into the C-pillar trim panel -4-.

Installing luggage mesh





Installation position for luggage net/mesh

1. Insert luggage mesh -1- right and left in the mounting saddle -3- -Arrow A- and then engage in the bodyshell hooks -2- -Arrow B-.





Installing luggage mesh

2. Lock the locking mechanism of the luggage mesh right and left in -direction of arrow-.





Locking luggage mesh

3. Close rear lid.
4. Fold back front seat.

Installing luggage net





Installation position for luggage net/mesh

1. Position luggage net -1- and engage in the tie-down eyes -2-.





Installing luggage net

2. Close rear lid.