Hood Insulator / Pad: Service and Repair

WM 700419 Removing and installing insulation for engine compartment lid

Removing insulation for engine compartment lid





1. Open engine compartment lid.
2. Take off retaining clips and remove insulation.
2.1. Carefully insert a screwdriver between the insulation -1- and retaining clips -2-.
2.2. Push locking tab of retaining clip towards -A-.
2.3. Disengage retaining clips and remove -Arrow B-.
2.4. Remove the insulation by pulling it forwards.






Installing insulation for engine compartment lid





1. Install insulation and clip retaining clips into place.
1.1. Position insulation -1- on engine compartment lid.
1.2. Line up insulation using the fixing openings.
1.3. Push retaining clips -2- into fixing openings until they can be heard to engage.





2. Close the engine compartment lid.