706519 Removing and installing lid for oddments tray

WM 706519 Removing and installing lid for oddments tray

Preliminary work

1. Remove door trim panel. -> 705919 Removing and installing door trim panel - section on "removing" 705919 Removing and installing door panel

Removing lid for oddments tray

Removing lid for oddments compartment





Installtion position of lid for oddments compartment

1. Disengage spring -1- with a suitable pair of pliers from the guide mechanism -2-.





Disengaging spring

2. Unclip shock absorber -3- from door trim panel -4-.





Unclipping shock absorber

3. Press together guide mechanism on the right and left -2- with a suitable pair of pliers -Arrow A- and disengage from the door trim panel -4- -Arrow B-.





Disengaging guide mechanism

Installing lid for oddments tray

Installing lid for oddments compartment





Installation position of lid for oddments compartment

1. Insert guide mechanism on the right and left -2- in door trim panel -4- -Arrow A- and engage -Arrow B-.





Engaging guide mechanism

2. Position shock absorber -3- in the door panel -4- and guide mechanism, and push in until it engages at the groove.





Clip in shock absorber

3. Engage spring -1- with a suitable pair of pliers in the guide mechanism -2-.





Engaging spring

Subsequent work

1. Install door trim panel. -> 705919 Removing and installing door trim panel - section on "installing" 705919 Removing and installing door panel