370419 Removing and installing selector knob

WM 370419 Removing and installing selector knob

Removing selector knob

Information

The ignition key must be in position 1 before the locking button can be pressed.

1. Press locking button and release lug under the locking button in direction of travel using an Allen key, for example.





Levering locking button off

2. Pull off locking button against the direction of travel.





Pulling off locking button

3. Use a screwdriver to lever the spring clip out of the lock.





Detaching spring clip

4. Pull selector knob up and off the selector lever.





Removing selector knob

Installing selector knob

1. Push spring clip all the way back.
2. Fit locking button.
3. Push complete selector knob over the lock and all the way onto the selector lever.





Pushing on selector knob