399035 Checking and topping up oil for four-wheel final drive

WM 399035 Checking and topping up oil for four-wheel final drive

Tools





Technical values






Preliminary work for oil for four-wheel final drive

1. Remove engine guard. => 108019 Removing and installing engine guard - section on "removing"

Checking oil for four-wheel final drive

WARNING

Risk of scalding from hot oil

-> Let the oil cool down
-> Wear personal protective gear (goggles, gloves)

Information

- Vehicle must be horizontal to check oil level in all-wheel final drive.

1. Unscrew oil inspection plug -A- with tool special inserts mod. AB 170.





Oil inspection plug-filler screw

2. The oil level is correct if the oil reaches the lower edge of the inspection window.
3. If this is not the case, top up the oil. => 399035 Checking and topping up oil for all-wheel final drive - section on "Filling"
4. Screw in oil inspection plug -A- with new sealing ring. To do this, use the special tool special inserts model AB 170 and accessory for the torque wrench: open ring wrench insert a/f 13 + adapter 98-1. => Tightening torque: 26 ftlb.





Tightening to the specified torque

Topping up oil for four-wheel final drive

Filling oil for all-wheel final drive

WARNING

Risk of scalding from hot oil

-> Let the oil cool down
-> Wear personal protective gear (goggles, gloves)

Information

- Vehicle must be horizontal in order to fill final drive.

1. Unscrew oil inspection plug -A- with tool special inserts mod. AB 170.





Oil inspection plug-filler screw

Information

- Use only oil approved by Porsche.

2. Fill with oil using the ATF filling device for filling transmission 161 to the lower edge of inspection plug -A-.
3. Screw in oil inspection plug -A- with new sealing ring. To do this, use the special tool special inserts model AB 170 and accessory for the torque wrench: open ring wrench insert a/f 13 + adapter 98-1. => Tightening torque: 26 ftlb.





Tightening to the specified torque

Subsequent work for oil for four-wheel final drive

1. Fit engine guard. => 108019 Removing and installing engine guard - section on "Installing"