665019 Removing and installing rear logo (I-no. XAM)

WM 665019 Removing and installing rear logo (I-no. XAM)

Tools





Technical values






Removing rear logo

1. Heating the rear lid
1.1. Heat the rear lid -1- close to the logo -2- using the hot-air blower v.a.g 1416 -(3)-.





Heating logo

2. Levering off the logo using a plastic spatula
2.1. Slide a plastic spatula -1- under the logo -2- and lever off the logo -arrows-.





Levering off logo

3. Cleaning the lid
3.1. Loosen the adhesive residue -1- on the lid -2- using silicone remover and remove it.





Cleaning the lid

Replacing model logo

Replacing the Cayman model logo

1. Find the centre of the lid.





Cayman logo

2. Position the logo -Cayman- with the dimensions -A and B- => Dimension: 264.7 mm+/-1 mm and -C- => Dimension: 130 mm+/-1 mm on the lid and stick it on.