Antenna Amplifier: Service and Repair

WM 918419 Removing and installing antenna amplifier

Preliminary work

Preliminary work - antenna amplifier

-> 705719 Removing and installing A-pillar trim - removing 705719 Removing and installing A-pillar trim

Removing antenna amplifier

Information

The antenna amplifier is installed together with the PCM.

The antenna amplifier is located on the A-pillars.

Remove the ignition key and switch off the audio system.

1. Unplug the antenna plug for the windscreen -1, 2-.





Connector for antenna amplifier

2. Unplug the plug connections for the antenna control unit -3, 4- on the left-hand side and -3, 4, 5- on the right-hand side.
3. Unscrew both fastening screws -6-.

Installing antenna amplifier

1. Position the antenna amplifier on the A-pillar and screw down the fastening screws -6-.





Connector for antenna amplifier

2. Plug in the connectors for the antenna control unit -3, 4- on the left-hand side and -3, 4, 5- on the right-hand side.
3. Plug in the antenna connectors for the windscreen -1- and -2-.

Subsequent work

Subsequent work - antenna amplifier

-> 705719 Removing and installing A-pillar trim - installing 705719 Removing and installing A-pillar trim