519219 Removing and installing Cover For Front Underbody

WM 519219 Removing and installing cover for front underbody

Technical values





Preliminary work

Lift the vehicle. -> 400000 Lifting the vehicle

Removing cover for front underbody





Installation position of cover for front underbody

Information

Fastening nuts cannot be used again following removal.

1. Unscrew fastening screws -2- and fastening nuts -3-.





Removing cover

2. Pull cover for front underbody -1- out of the overlap.

Installing cover for front underbody





Installation position of cover for front underbody

Information

When sliding in the underbody cover, make sure the overlap is correct.

1. Insert cover for front underbody -1-.





Install cover

2. Tighten fastening screws -2-. Tightening torque => Final tightening: 1.5 ftlb.
3. Tighten fastening nuts -3-. Tightening torque => Final tightening: 0.5 ftlb.

Subsequent work

Lower the vehicle. -> 400000 Lifting the vehicle