519319 Removing and installing Cover For Centre Underbody

WM 519319 Removing and installing cover for centre underbody

Technical values





Preliminary work

Lift the vehicle. -> 400000 Lifting the vehicle

Removing cover for centre underbody

Removing cover for side underbody





Installation position of cover for side underbody

Information

Fastening nuts cannot be used again following removal.

Information

Fastening nuts cannot be used again following removal.

1. Unscrew fastening screws -2- and fastening nuts -3-.





Removing side cover

2. Pull cover for side underbody -1- out of the overlaps.

Removing cover for centre underbody





Installation position of cover for centre underbody

Information

Fastening nuts cannot be used again following removal.

Information

Fastening nuts cannot be used again following removal.

1. Unscrew fastening nuts -3-.





Removing centre cover

2. Press covers for side underbody down slightly and remove cover for centre underbody -4- from overlaps.

Installing cover for centre underbody





Installation position of cover for centre underbody

Information

When sliding in the underbody cover, make sure the overlap is correct.

1. Insert cover for centre underbody -4- while pressing covers for side underbody slightly down.





Install centre cover

2. Tighten fastening nuts -3-. Tightening torque => Final tightening: 1.5 ftlb.

Installing cover for side underbody





Installation position of cover for side underbody

Information

When sliding in the underbody cover, make sure the overlap is correct.

1. Insert cover for side underbody -1-.





Installing side cover

2. Tighten fastening screw -2-. Tightening torque => Final tightening: 1.5 ftlb.
3. Tighten fastening nuts -3-. Tightening torque => Final tightening: 1.5 ftlb.

Subsequent work

Lower the vehicle. -> 400000 Lifting the vehicle