742019 Removing and installing cover for front middle backrest (air-conditioned comfort seat)

WM 742019 Removing and installing cover for front middle backrest (air-conditioned comfort seat)

Removing cover for front middle backrest

Installation position of cover for front middle backrest

1. Release rear cover.

Releasing rear cover

1.1. Carefully press cover -1- out of the backrest shell -2- using a screwdriver -3- ( -arrows- ).
2. Release cover at the front.

Releasing cover at the front

2.1. Insert your hand into the top of the cover -1- and disengage it by pulling it up out of the backrest frame -2- ( -arrow A- ).
2.2. Press cover -1- together slightly at the sides -arrows B- and disengage it.
3. Release intake plenum.

Releasing intake plenum

3.1. Fold cover -1- forward slightly at the top -arrow A-.
3.2. Release intake plenum -2- from the air duct -3- by pressing in the locking lugs -arrows B-.

Information

Mark plug connection assignment before disconnecting the plug connections.

4. Disconnect plug connections.

Disconnecting plug connections

4.1. Disconnect plug connections for backrest seat heating -1- ( -arrows- ).

Installing cover for front middle backrest

1. Place cover on the seat surface and plug in the plug connections for backrest seat heating -1- ( -arrows- ).

Connecting plug connections

Information

Make sure that the connections are plugged in fully.

2. Lock the intake plenum.

Locking intake plenum connection

2.1. Fold up cover -1- ( -arrow A- ).
2.2. Press intake plenum -2- into the air duct -3- ( -arrow B- ) until the locking lugs lock with an audible click.
3. Secure front cover.

Securing front cover

3.1. Press in cover -1- in the middle -arrows A- until the locking lugs at the side engage.
3.2. Engage cover -1- at the top of the backrest frame -2- ( -arrow B- ).
4. Secure cover at the back.

Securing cover

4.1. Press cover -1- into the backrest shell -2- at the bottom using a plastic wedge -3- ( -arrows- ) until it locks with an audible click.