702019 Removing and installing cover for dashboard (defroster trim)

WM 702019 Removing and installing cover for dashboard (defroster trim)

Preliminary work

Remove A-pillar trim panel. -> 705719 Removing and installing A-pillar trim panel - section on "removing" 705719 Removing and installing A-pillar trim

Removing cover for dashboard (defroster trim)

Removing cover for centre dashboard (defroster trim)





Installation position for centre dashboard cover (defroster trim)

1. Insert plastic wedge under dashboard cover (defroster trim) centre -1- and lever out in upward direction -arrow-.





Removing centre cover

2. Disconnect plug connection for sun sensor.

Removing cover for dashboard (defroster trim) on right and left





Installation position for dashboard cover (defroster trim)

1. Insert plastic wedge under dashboard cover (defroster trim) left and right -4- and lever out of sheetmetal clips -5-.





Removing side cover

Installing cover for dashboard (defroster trim)

Installing cover for dashboard (defroster trim) on right and left





Installation position for dashboard cover (defroster trim)

1. Check sheetmetal clips -5- for deformation; replace if necessary.





Installing side cover

2. Clip cover for dashboard (defroster trim) into place on left and right -4-.

Installing centre dashboard cover (defroster trim)





Installation position for centre dashboard cover (defroster trim)

1. Lock plug connection for sun sensor.
2. Position centre dashboard cover (defroster trim) -1- and clip in -arrow-.





Install centre cover

Subsequent work

Install A-pillar trim panel. -> 705719 Removing and installing A-pillar trim panel - section on "installing" 705719 Removing and installing A-pillar trim