370819 Removing and installing selector support

WM 370819 Removing and installing selector support

Technical values





Preliminary work

1. Remove selector knob.
-> 370419 Removing and installing selector knob 370419 Removing and installing selector knob
2. Remove centre console.
-> 681719 Removing and installing centre console 681719 Removing and installing centre console

Removing selector support

1. Move selector lever to position "P".
2. Disconnect selector support





Connecting selector support

2.1. Open the bayonet lock -2- on the parking lock cable, pull it off and disengage it at the support.
2.2. Release and pull off electric multiple plug connector -3-.
3. Remove selector support.
Unscrew nuts -2- and remove selector support -1- in an upward direction.





Removing and installing selector support

Installing selector support

Information

Before starting to install the selector support, ensure that the transmission and selector support are in position "P".

1. Install selector support.
Fit the selector support -1- and screw on and tighten nuts -2-.





Removing and installing selector support

=> Tightening torque: 10 Nm (7.5 ftlb.)
2. Connect selector support.





Connecting selector support

2.1. Insert parking lock cable into the bayonet lock -2- and lock the bayonet lock.
2.2. Attach parking lock cable to the support and engage securely.
2.3. Connect electric multiple plug connector -3-.

Subsequent work

1. Install centre console.
-> 681719 Removing and installing centre console 681719 Removing and installing centre console
2. Install selector knob.
-> 370419 Removing and installing selector knob 370419 Removing and installing selector knob