668319 Removing and installing number plate cover

WM 668319 Removing and installing number plate cover

Removing number plate cover

Removing front number plate cover (RoW)

Installation position of front number plate cover

1. Unscrew fastening screws -1- and take off front number plate cover -2- ( -arrow- ).

Removing front number plate cover

Removing front number plate cover (ECE)

Installation position of front number plate cover

1. Unscrew fastening screws -1- and take off front number plate cover -2- ( -arrow- ).

Removing front number plate cover

Installing number plate cover

Drilling holes for number plate cover (ECE)

Information

- Additional assembly operations must be performed when replacing the front apron since the replacement part is supplied without bore holes.

1. Drill holes for number plate cover.

Drilling holes for number plate cover

1.1. Determine centre of front apron and mark.
1.2. Determine bore on right and left from the centre with dimension -X= 125 mm- and dimension -Y=63 mm- from the lower edge of the front apron and mark.
1.3. Carefully drill bore holes for the number plate cover in the marked area using a 7 mm drill bit.

Drilling holes for number plate cover (RoW)

Information

- Additional assembly operations must be performed when replacing the front apron since the replacement part is supplied without bore holes.

1. Drill holes for number plate cover.

Installation position of front number plate cover

1. Position front number plate cover -2- at the specified bore holes on the front apron -arrow-.

Installing front number plate cover

2. Screw in self-tapping fastening screws -1-.

Installing front number plate cover (ECE)

Installation position of front number plate cover

1. Position front number plate cover -2- at the specified bore holes on the front apron -arrow-.

Installing front number plate cover

2. Screw in self-tapping fastening screws -1-.