Ash Tray: Service and Repair

WM 682019 Removing and installing front ashtray

Removing front ashtray





1. Remove front air-conditioning system regulator. -> 870219 Removing and installing front air-conditioning system regulator - "Removing" section. Service and Repair
2. Open the front ashtray and remove the holder.
3. Remove front ashtray.
3.1. Put the gear-shift lever in the -D- position.
3.2. Undo fastening screws -2-.
3.3. Pull the front ashtray -1- to the rear -Arrow A- , until the plug becomes accessible.





4. Pull off plug.
4.1. Release -3- and pull off -Arrow B- plug.





5. Pull out ashtray -1- to the rear -arrow A-.






Installing front ashtray





1. Insert front ashtray -1- ( -arrow A- ).





2. Connect connector.
2.1. Push on the plug -3- until the locking tabs engage audibly -Arrow B-. When doing so, ensure that the plug -3- is positioned correctly in the mount -4- for the front ashtray -1-.









3. Install front ashtray.
3.1. Insert front ashtray -1- into the guides -5- and push it in completely -arrow A-.





3.2. Screw in -2- fastening screws.





3.3. Put the gear-shift lever in the -P- position.