Seat Temperature Thermostat: Service and Repair

WM 742619 Removing and installing regulator for rear seat heating

Removing regulator for rear seat heating





Overview of regulator for rear seat heating

1. Carefully unclip the cover using a plastic wedge -arrows-.





Unclipping cover

2. Unscrew fastening screws -Arrows 1- and remove tray together with retaining bracket -arrow-.





Removing compartment with retaining bracket

3. Release both connectors -Arrow A- and pull them off -Arrow B-.





Pulling off connector

4. Release regulator -Arrow A- and remove it on the inside by pulling upwards -Arrow B-.





Removing regulator

Installing regulator for rear seat heating

1. Insert regulator from the inside -Arrow A- until locking tabs are felt to engage -Arrow B-.





Inserting regulator

2. Push in the lock -Arrow A- , then insert the connector -Arrow B- until the locking tab -a- is felt to engage in the opening -b-.





Inserting connector

3. Fit tray into the console -arrow- and secure tray and retaining bracket -C- with fastening screws -Arrows 1-.





Installing and securing tray

4. Clip in the cover -arrows- until the locking tabs are felt to engage.





Clipping in cover