License Plate Frame: Service and Repair

WM 668319 Removing and installing number plate cover

Tools





Technical values





Removing number plate cover

Removing number plate cover (Europe)

1. Remove number plate.





Removing number plate cover (Europe)

1.1. Unscrew fastening screws -2-.
1.2. Remove number plate -3-.
2. Unscrew fastening screws -1- and take off front number plate cover.

Removing number plate cover (USA)

1. Remove number plate.





Removing number plate cover (USA)

1.1. Unscrew fastening screws -2-.
1.2. Remove number plate -3-.
2. Unscrew fastening screws -1- and take off front number plate cover.

Removing number plate cover (Japan)

1. Remove number plate.





Removing number plate cover (Japan)

1.1. Unscrew fastening screws -2-.
1.2. Remove number plate -3-.
2. Unscrew fastening screws -1- and take off front number plate cover.

Installing number plate cover

Installing number plate cover (Europe)

Align the number plate cover on the front apron with the help of the cut-out.





Aligning number plate cover

Information

Self-tapping screws are used to secure the number plate cover. When fitting the number plate cover for the first time (e.g. on a new front apron), the screws can be screwed directly into the front apron. There is no need to drill any holes.

1. Screw in fastening screws -1-.





Installing number plate cover (Europe)

2. Position the number plate.
3. Screw in fastening screws -2-.

Installing number plate cover (USA)

1. Align the number plate cover on the front apron with the help of the cut-out.





Aligning number plate cover (USA/Japan)

Information

Self-tapping screws are used to secure the number plate cover. When fitting the number plate cover for the first time (e.g. on a new front apron), the screws can be screwed directly into the front apron. There is no need to drill any holes.

2. Screw in fastening screws -1-.





Installing number plate cover (USA)

3. Position the number plate.
4. Screw in fastening screws -2-.

Preparing new front apron for installing number plate cover (Japan only)

1. Align the number plate cover on the front apron with the help of the cut-out.





Aligning number plate cover (USA/Japan)

2. Place number plate cover flat on the front apron.
3. Mark screw-on points on the front apron using a scriber.





Marking screw-on points

4. Drill holes on the front apron using a paring drill bit Conical paring drill bit Nr.128 => Diameter: 25 mm.





Drilling holes

Installing number plate cover (Japan)

1. Align the number plate cover on the front apron with the help of the cut-out.





Aligning number plate cover (USA/Japan)

Information

Self-tapping screws are used to secure the number plate cover. When fitting the number plate cover for the first time (e.g. on a new front apron), the screws can be screwed directly into the front apron. There is no need to drill any holes.

2. Screw in fastening screws -1-.





Installing number plate cover (Japan)

3. Position the number plate.
4. Screw in fastening screws -2-.