744819 Removing and installing suction fan for rear seat surface

WM 744819 Removing and installing suction fan for rear seat surface

Preliminary work

Remove rear seat. -> 724819 Removing and installing rear seat - section on "Removing" 724819 Removing and installing rear seat

Removing suction fan for rear seat surface





Installation position of suction fan for rear seat surface

1. Unclip the seat cover at the rear left and right.





Unclipping seat cover

2. Turn the rubber hose clockwise (arrow on the rubber is facing the direction in which you are turning the hose) -arrow A-.
3. Pull the rubber hose off the motor -arrow B-.





Pulling off rubber hose

4. Unplug electric plug connection.





Unplugging electric plug connection

5. Unclip the motor from the four clips and remove it -arrow C-.





Unclipping motor

6. The rubber hose remains attached to the heating pad.

Installing suction fan for rear seat surface

1. Position the motor -arrow D- and clip it in on the frame using the four clips.





Clipping in motor

2. Fit the rubber hose with the openings -1- onto the plastic lugs -2- on the motor -arrow E-.





Fitting rubber hose

3. Turn the rubber hose anti-clockwise to secure it -arrow F-.





Turning rubber hose

4. Insert electric plug connection until it engages securely.





Plugging in electric plug connection

5. Clip in the seat cover.





Clipping in seat cover

Subsequent work

Install rear seat. -> 724819 Removing and installing rear seat - section on "Installing" 724819 Removing and installing rear seat