Removal and Replacement

WM 136019 Removing and installing flywheel

Tools





Technical values





Preliminary work

1. Remove the transmission. -> 343519 Removing and installing transmission or -> 373419 Removing and installing Porsche Doppelkupplung (PDKit) 373419 Removing and installing Porsche Doppelkupplung (PDK)
2. Remove the clutch pack on vehicles with manual transmission. -> 305019 Removing and installing clutch

Removing flywheel

1. Block flywheel. To do this, attach toothed segment 9538/1 to a screw hole at the bottom of the oil guide housing so that at least one tooth engages with the ring gear. => Toothed segment





Toothed segment

2. Remove screws. Replace screws.





Flywheel and clutch









PDKit flywheel





Installing flywheel

1. Block flywheel. To do this, attach toothed segment 9538/1 to a screw hole at the bottom of the oil guide housing so that at least one tooth engages with the ring gear. => Toothed segment





Toothed segment

2. Fit new screws crosswise.





Flywheel and clutch









PDKit flywheel





Subsequent work

1. Fit the clutch pack on vehicles with manual transmission. -> 305019 Removing and installing clutch
2. Fit the transmission. -> 343519 Removing and installing transmission or -> 373419 Removing and installing Porsche Doppelkupplung (PDKit) 373419 Removing and installing Porsche Doppelkupplung (PDK)