96781900 Removing and installing control unit for garage door opener

WM 967819 Removing and installing control unit for garage door opener

Removing control unit for garage door opener

1. Carefully unclip control units -1- at the openings provided -arrows- with a small screwdriver and remove.





Removing control unit for garage door opener

2. Pull off connector -1- for control units -2- -arrows- and remove control units -2-.





Pulling off connector for control units.

Installing control unit for garage door opener

1. Push on connector -1- for control units -2- -Arrows A-.





Pushing on connector for control units

2. Insert control units -2- with electric connecting lines into the assembly openings of the cover -3- in an upwards direction -Arrows B-.
3. Insert control units -1- and press in until the latches -arrows- are felt to engage.





Installing control unit for garage door opener