519419 Removing and Installing Cover for Rear Underbody

WM 519419 Removing and installing cover for rear underbody

Technical values





Preliminary work

Raise the vehicle. => 4X00IN01 Lifting the vehicle

Removing cover for rear underbody





Installation position of cover for rear underbody

Information

Fastening nuts cannot be used again following removal.

1. Unscrew fastening screws -2- and fastening nuts -3-.





Removing cover

2. Remove cover for rear underbody -1-.

Installing cover for rear underbody

Information

When sliding in the underbody cover, make sure the overlap is correct.

1. Insert cover for rear underbody -1-.





Installing cover

2. Tighten fastening screws -2- and fastening nuts -3-. => Tightening torque: 2 Nm (1.5 ftlb.) => Tightening torque: 2.5 Nm (2 ftlb.)

Subsequent work

Reworking

Lower the vehicle. => 4X00IN01 Lifting the vehicle