708519 Removing and installing rear roof lining

WM 708519 Removing and installing rear roof lining

Removing rear roof lining





Installation location of rear roof trim panel

1. Grasp underneath the roof trim panel -1- at the side and, pulling in -direction of arrow- , carefully remove it from the cable clamps -2-.





Removing rear roof trim panel

Installing rear roof lining





Installation location of rear roof trim panel

Information

- Cable clamps -2- must always be replaced when the roof trim panel is removed.

If cable clamps are not replaced, this can cause noises in the roof trim panel when driving.

1.
2. Position roof trim panel -1- and press into place in -direction of arrow- ensuring that the pegs engage audibly in the cable clamps -2-.





Installing rear roof trim panel