576319 Removing and Installing Rubber Seal for Door

WM 576319 Removing and installing rubber seal for door

Preliminary work

1. Remove inner sill. -> 680519 Removing and installing inner sill - removing

Removing rubber seal for door





Installation position of rubber seal for door

1. Remove rubber seal for door -1- from the circumference of the sheetmetal flange.





Removing rubber seal

Installing rubber seal for door





Installation position of rubber seal for door

Information

- The rubber seal for the door must be fitted by hand.

- Pay particular attention to the areas near the tight roundings for correct installation; there must be no deformation or stretching.

- Check the air vents; they must not be closed or covered.

1. Fit rubber seal for door -1- in upper area of B-pillar on the sheetmetal flange ( -section A-A- ) and attach in -direction of arrow-.





Installing rubber seal

Subsequent work

1. Install inner sill. -> 680519 Removing and installing inner sill - installing