692519 Removing and installing rear belt lock

WM 692519 Removing and installing rear belt lock

Technical values





Preliminary work

Remove back seat cushion. -> 745719 Removing and installing back seat cushion - section on "Removing" Service and Repair

Removing rear belt lock





Installation position for rear belt lock

1. Press out cover -1- with a plastic spatula.





Removing rear belt lock

2. Unscrew fastening screw -2- from the seat-belt buckle -4-.
3. Remove metal clip -3-.

Installing rear belt lock





Installation position for rear belt lock

1. Check metal clip -3- , replace if necessary.
2. Position seat-belt buckle -4- on the seat well and screw down with the fastening screw -2-. Tightening torque => Tightening torque: 37 ftlb.+/-3.5 ftlb.





Installing rear belt lock

3. Press in -1- cover.

Subsequent work

1. Install back seat cushion. -> 745719 Removing and installing back seat cushion - section on "Installing" Service and Repair