Rear Fender Liner: Service and Repair

WM 536919 Removing and installing rear wheel housing liner

Technical values





Preliminary work

1. Remove wheel. => 440519 Removing and installing wheel - section on "Removing"

Removing rear wheel housing liner





Overview, removing and installing rear wheel housing liner

Information

Fastening nuts cannot be used again following removal.

1. Unscrew fastening screws -1- and fastening nuts -2-.





Releasing wheel housing liner

2. Remove wheel housing liner -A-.

Installing rear wheel housing liner





Overview, removing and installing rear wheel housing liners

1. Insert wheel housing liner -A-.





Install wheel housing liner

2. Screw in fastening screws -1- and tighten them to the specified tightening torque=> Final tightening: 2 Nm (1.5 ftlb.).
3. Screw on fastening nuts -2- and tighten them to the specified tightening torque=> Final tightening: 1.5 Nm (1.0 ftlb.).

Subsequent work

1. Install wheel. => 440519 Removing and installing wheel - section on "Installing"