Headlamp Washer Spray Nozzle: Service and Repair

WM 927219 Removing and installing spray nozzle for headlight washer system

Preliminary work

Preliminary work for spray nozzle of headlight washer system

Remove front apron. => Removing and installing front apron - section on "removing"

Remove fog lights. => Removing and installing fog lights - section on "removing"

Removing spray nozzle for headlight washer system





Installation position for the 911 Carrera

1. Press both retaining lugs of spray nozzle together and remove it from front apron.





Pressing retaining lugs of spray nozzles together

2. Release quick-connecting lock of water connection -a- and pull away from the spray nozzle.





Pressing quick-connecting lock and removing water connection

Installing spray nozzle for headlight washer system

1. Insert spray nozzle in front apron until it engages.





Inserting spray nozzle in front apron

2. Push water hose onto the spray nozzle until it is felt to engage.





Inserting spray nozzle in front apron and connecting hose line

Subsequent work

Subsequent work for spray nozzle of headlight washer system

1. Install fog lights. => Removing and installing fog lights - section on "Installing"
2. Install front apron. => Removing and installing front apron - section on "Installing"
3. Bleed the spray nozzles. The system is bled by activating the spray nozzles for the headlight washer multiple times. Depending on whether it is a left or right spray nozzle, or whether the water reservoir for the headlight washer was completely emptied or not, the bleeding process can require frequent activations of the spray nozzle.

Removing and installing spray nozzle head

Removing spray nozzle head

1. Insert an angled scriber, for example, into the opening in the nozzle head and pull the spray nozzle up and out.





Pulling out nozzle head

2. Hold the nozzle head at the top and disengage the catch on the spray nozzle with a small screwdriver -A-. The nozzle head is released from the spray nozzle and the spray nozzle moves back into place.

Installing spray nozzle head

1. Insert the nozzle head into the opening on the spray nozzle and slide it in as far as it will go. The nozzle head clicks into place in the spray nozzle.





Pressing nozzle head into place

2. Check function of spray nozzle and spray range.