Windshield Washer Reservoir: Service and Repair
WM 926019 Removing and installing reservoir for windscreen washer system
Technical values
Preliminary work
Preliminary work - tank for windscreen washer system
Remove front left wheel. => 440519 Removing and installing wheel - section on "removing"
Remove front left wheel housing liner. => 505619 Removing and installing front wheel housing liner - section on "removing"
Remove cover of plenum chamber on left. => 852219 Removing and installing cover - section on "removing"
Drain windscreen washer water with the pump for windscreen or headlights. If this does not function, the filled tank be removed.
Removing reservoir for windscreen washer system
Installation position
1. Lift lever on water filler neck and pull out the filler neck.
Removing tank
2. Release water connection for the windscreen washer spray nozzles and pull apart.
3. Release water connection for the headlight washer spray nozzles and pull apart.
4. Unscrew fastening screw -2- and pull the tank from the mounting point on the A-pillar.
5. Release the electrical plugs -a- and pull them off.
Removing tank from the A-pillar and disconnecting the electrical plug connections
Installing reservoir for windscreen washer system
1. Retain the tank in the wheel housing and push in electrical plug connections until plugs are felt to engage.
Connecting the plugs and engaging the tank at the A-pillar
2. Engage the windscreen washer tank in the A-pillar and secure with the fastening screw -2-. => Tightening torque: 15 ftlb.
Installing tank:
3. Engage the electrical leads in the windscreen washer tank.
4. Connect water connection for the windscreen washer spray nozzles.
5. Connect water connection for the headlight washer spray nozzles.
6. Route and engage the water lines to the tank.
Subsequent work
Subsequent work - tank for windscreen washer system
Install front left wheel housing liner. => 505619 Removing and installing front wheel housing liner - section on "installing"
Install front left wheel. => 440519 Removing and installing wheel - section on "installing"
Install cover of plenum chamber on left. => 852219 Removing and installing cover - section on "installing"