683519 Removing and installing front handle

WM 683519 Removing and installing front handle

Technical values





Removing front handle

Removing front grab handles

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.

1. Fold out grab handle.





Folding out grab handle

2. Open covers -2- on the grab handle -1-.





Opening covers

3. Unscrew fastening screws -3-.





Detaching grab handle

4. Remove -1- grab handle.





Removing grab handle

Installing

Installing front grab handles

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.

1. Position grab handle -1-.





Positioning grab handle

2. Tighten fastening screws -3- to => Tightening torque : 5.5 Nm (4 ftlb).





Securing grab handle

3. Close covers -2-.





Closing covers

Information

The handle must return itself to a normal position after it is released!

4. Check fold-in function.





Folding in grab handle