683719 Removing and installing rear handle
WM 683719 Removing and installing rear handle
Technical values
Removing rear handle
Removing rear grab handles
Information
Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.
1. Fold out grab handle.
Folding out grab handle
2. Unclip cover -2- on grab handle -1- using a screwdriver.
Cover on grab handle mounting
3. Unscrew fastening screws -3-.
Detaching grab handle
4. Remove -1- grab handle.
Removing grab handle
Installing rear handle
Installing rear grab handles
Information
Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.
1. Position grab handle -1-.
Positioning grab handle
2. Tighten fastening screws -3- to => Tightening torque : 5.5 Nm (4 ftlb).
Securing grab handle
3. Clip in cover -2-.
Cover on grab handle mounting
Information
The handle must return itself to a normal position after it is released!
4. Check fold-in function.
Folding in grab handle