724819 Removing and installing 1/3-split folding rear seat

WM 724819 Removing and installing 1/3-split folding rear seat

Technical values





Preliminary work

1. Remove padding for 1/3-split folding rear seat. -> 744919 Removing and installing padding for 1/3-split folding rear seat - section on "Removing" 744919 Removing and installing padding for 1/3-split folding rear seat

Removing 1/3-split folding rear seat





Installation position of 1/3-split folding rear seat

1. Unscrew fastening screws -1- on 1/3-split folding rear seat.





Unscrewing fastening screws on rear seat

2. Unclip electric plug connection -2- from the bracket.





Electric plug connections for 1/3-split folding rear seat

3. Remove 1/3-split folding rear seat from the vehicle.

Installing 1/3-split folding rear seat

1. Position 1/3-split folding rear seat in the vehicle.
2. Tighten all fastening screws -1 - 4- hand-tight.
3. Observe tightening sequence 1.4.





Tightening sequence

4. Tighten M12 fastening screws at the rear -1 and 2- to => Tightening torque: 50 Nm (37 ftlb.)+/-7.5 Nm (+/-5.5 ftlb.).
5. Tighten M10 fastening screws at the front -3 and 4- to => Tightening torque: 50 Nm (37 ftlb.)+/-7.5 Nm (+/-5.5 ftlb.).
6. Clip electric plug connection -2- into the bracket.





Electric plug connections for 1/3-split folding rear seat

Subsequent work

1. Install padding for 1/3-split folding rear seat. -> 744919 Removing and installing padding for 1/3-split folding rear seat - section on "Installing" 744919 Removing and installing padding for 1/3-split folding rear seat