108019 Removing and installing engine guard

WM 108019 Removing and installing engine guard

Technical values





Removing engine guard

1. Unscrew side fastening screws -1- for the front part of the engine guard.





Loosening fastening screws at the sides

2. Unscrew rear -2- and front fastening screws -3- for the front part of the engine guard.





Loosening fastening screws at the front

3. Remove front part of engine guard.
4. Unscrew rear -5- and front fastening screws -4- for the rear part of the engine guard.





Loosening fastening screws at the rear

5. Remove rear part of engine guard.





Removing rear engine guard

Installing engine guard

The engine guard is installed in reverse order to removal. => Tightening torque: 9 Nm (6.5 ftlb.)