902519 Removing and installing instrument cluster

WM 902519 Removing and installing instrument cluster

Tools





Technical values





Preliminary work

1. If the instrument cluster has to be replaced, the values/data must be read out prior to removal using PIWIS Tester II 9818. -> 902555 Replacing instrument cluster 902555 Replacing instrument cluster.
2. Remove dashboard inset at the centre and bottom. -> 900319 Removing and installing dashboard inset - section on "Removing" 9900319 Removing and installing dashboard inset

Removing instrument cluster

NOTICE

Voltage peaks

- Risk of damage to load or to the control unit

-> Remove the ignition key and switch off load before disconnecting or removing load.

Information

Always comply with the regulations for handling ESD-sensitive components!

- Assembly work must only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche.

- The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed.

- Never touch the electric pins and plug contacts.





Installation position of instrument cluster

1. Unscrew four fastening screws -1-.





Removing instrument cluster

2. Release electric plug connection -a- and pull it off -A-.





Unplugging connector

3. Release clip -1- on electric plug connection -a- and bend it over -A- , then pull off connector -B-.





Unplugging connector

Installing instrument cluster

1. The instrument cluster is installed in reverse order to removal.
2. Tighten four fastening screws -1- to => Tightening torque: 1.5 Nm (1 ftlb.)





Installing instrument cluster

Subsequent work

1. Install dashboard inset at the centre and bottom. -> 900319 Removing and installing dashboard inset - section on "Installing" 9900319 Removing and installing dashboard inset
2. If the instrument cluster was replaced, the values/data that were read out must be written back into the instrument cluster again using PIWIS Tester II 9818. -> 902555 Replacing instrument cluster 902555 Replacing instrument cluster.