License Plate Lamp: Service and Repair

WM 942919 Removing and installing number plate light

Removing

Removing number plate light

NOTICE

Voltage peaks

- Risk of damage to load or to the control unit

-> Switch off ignition and remove remote control before disconnecting or removing load.

1. Insert a screwdriver at the recess for the number plate light -1- and press number plate light in direction of arrow, then remove the number plate light.





Removing number plate light

2. Release plug connection -2- for number plate light -A- and pull it off -B-.





Plug connection for number plate light

Installing

Installing number plate light

1. The number plate light is installed in reverse order to removal.